plastic molded paving mold is spread in Europe and America, is a
personalized brick mold
Laying out the effect posted up like blocks of stones
the path is more exotic, to create a style of their own garden path.
Material: PP Resin
use this Concrete Paver Mold to build the pathways:
Mix cement with water, according to package directions. When ready to use,
the concrete will be the consistency of oatmeal and thick enough to hold an
edge when you slice into it with a shovel.
Fill the paver mold, scooping the concrete in with a shovel and making sure
to fill each area.
Using rubber gloves, spread the concrete around the mold, filling in any
gaps or low points. Tap the mold with your hand to eliminate any air
Following the contours of the mold, smooth out the concrete, wiping away any
Allow the concrete to set for a maximum of five minutes, then carefully
remove the mold. For the next stretch, rotate the mold a quarter-turn and
place it beside the paver just completed, angling slightly if you’re
creating a curving pathway.
After letting the concrete cure overnight, fill the cracks with dirt and
wash away any excess. Wet the ground around the newly formed pavers to help
Concrete Slabs Path Walk Maker Mould
DIY plastic molded paving mold
Home & Garden
Rated 5.00 out of 5$17.00
Rated 5.00 out of 5$33.48 – $35.28